Linux 3.0.0 rc1 released

Linux 終於在5月30日邁入新的重大版本 3.0
根據Linus的說法,這次的進版並沒有任何架構或API的重大變革,
而是Linus本人對於2.6.40以上的版本編號不認同以及2.X版本已歷經接近20年故有此進版動作.

回想Linux 2.2時代我才剛接觸Linux,
對Unix系統完全陌生還活在微軟帝國的勢力範圍,

而Linux 2.4時代進入職場開始真正使用並學習Linux.

時間過的真快啊,呵呵呵.

留一段 linux-omap 3.0.0-rc1 kernel build log 紀念這個重大的時刻.

  GEN     /home/gigijoe/BeagleBoard/build-linux-omap-2.6/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
  Using /home/gigijoe/BeagleBoard/linux-omap-2.6 as source for kernel
  GEN     /home/gigijoe/BeagleBoard/build-linux-omap-2.6/Makefile
make[2]: Nothing to be done for `all'.
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[2]: `include/generated/mach-types.h' is up to date.
  CALL    /home/gigijoe/BeagleBoard/linux-omap-2.6/scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  GZIP    kernel/config_data.gz
  IKCFG   kernel/config_data.h
  CC      kernel/configs.o
  LD      kernel/built-in.o
  LD      drivers/usb/storage/built-in.o
  LD      drivers/usb/built-in.o
  LD      drivers/built-in.o
  LD      vmlinux.o
  MODPOST vmlinux.o
  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  GZIP    arch/arm/boot/compressed/piggy.gzip
  AS      arch/arm/boot/compressed/piggy.gzip.o
  SHIPPED arch/arm/boot/compressed/lib1funcs.S
  AS      arch/arm/boot/compressed/lib1funcs.o
  LD      arch/arm/boot/compressed/vmlinux
  OBJCOPY arch/arm/boot/zImage
  Kernel: arch/arm/boot/zImage is ready
  UIMAGE  arch/arm/boot/uImage
Image Name:   Linux-3.0.0-rc1-next-20110530-11
Created:      Sat Jun  4 04:59:29 2011
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    2830748 Bytes = 2764.40 kB = 2.70 MB
Load Address: 0x80008000
Entry Point:  0x80008000
  Image arch/arm/boot/uImage is ready
gigijoe@gigijoe-laptop:~/BeagleBoard/linux-omap-2.6$ ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- make O=~/BeagleBoard/build-linux-omap-2.6 modules
  Using /home/gigijoe/BeagleBoard/linux-omap-2.6 as source for kernel
  GEN     /home/gigijoe/BeagleBoard/build-linux-omap-2.6/Makefile
make[2]: Nothing to be done for `all'.
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[2]: `include/generated/mach-types.h' is up to date.
  CALL    /home/gigijoe/BeagleBoard/linux-omap-2.6/scripts/checksyscalls.sh
  Building modules, stage 2.
  MODPOST 2 modules