Rowboat Android u-boot env

Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
Loading u-boot.bin from nand


U-Boot 2009.11 (Feb 23 2010 - 15:33:48)

OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Board revision C4
Die ID #799e000400000000040373051500e007
Hit any key to stop autoboot:  0
OMAP3 beagleboard.org # printenv
bootcmd=if mmcinit; then if run loadbootscript; then run bootscript; else if run loaduimage; then if run loadramdisk; then run ramboot; else run mmcboot; fii
bootdelay=10
baudrate=115200
loadaddr=0x80200000
rdaddr=0x81600000
console=ttyS2,115200n8
mmcargs=setenv bootargs console=${console} ${optargs} root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
ramargs=setenv bootargs console=${console} ${optargs} root=/dev/ram0 rw ramdisk_size=32768 initrd=${rdaddr},32M
jffs2args=setenv bootargs console=${console} ${optargs} root=/dev/mtdblock4 rw rootfstype=jffs2
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
bootscript=echo Running bootscript from mmc ...; autoscr ${loadaddr}
loaduimage=fatload mmc 0 ${loadaddr} uImage.bin
loadramdisk=fatload mmc 0 ${rdaddr} ramdisk.gz
ramboot=echo Booting from ramdisk.gz ...; run ramargs; bootm ${loadaddr}
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
usbtty=cdc_acm
stdout=serial,usbtty
stdin=serial,usbtty
stderr=serial,usbtty
serial=799e000400000000040373051500e007
dieid#=799e000400000000040373051500e007
ubifsargs=setenv bootargs console=${console} ${optargs} mem=88M@0x80000000 mem=128M@0x88000000 root=ubi0:rootfs ubi.mtd=4 rw rootfstype=ubifs
nandboot=echo Booting from nand ...; run ubifsargs; nand read ${loadaddr} 280000 400000; bootm ${loadaddr}
optargs=init=/init omapdss.def_disp=dvi omapfb.mode=dvi:720x480MR-16

Environment size: 1561/131068 bytes
OMAP3 beagleboard.org #
NAND read: device 0 offset 0x280000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-2.6.32
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2529392 Bytes =  2.4 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux..........................................................................................................................................
Linux version 2.6.32 (gigijoe@gigijoe-laptop) (gcc version 4.4.0 (GCC) ) #4 Wed Jan 5 02:16:23 CST 2011
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3 Beagle Board
Memory policy: ECC disabled, Data cache writeback
OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Reserving 4194304 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 54784
Kernel command line: console=ttyS2,115200n8 init=/init omapdss.def_disp=dvi omapfb.mode=dvi:720x480MR-16 mem=88M@0x80000000 mem=128M@0x88000000 root=ubi0:ros
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 88MB 128MB = 216MB total
Memory: 209408KB available (4368K code, 822K data, 172K init, 0K highmem)